Collet Drill Assembly and Raster™ Braille Carbide Drill Bit
We recommend this bit when drilling holes for Rasters™ in metal
substrate or other materials that do not possess a "memory". This method
should be used with an adhesive assist.

- #B4280000M 11/64" Collet Drill Assembly with wrench
  (For Raster™ Braille)
- #B4380000M 1/4" Collet Drill Assembly with wrench
 (For Raster™ Braille)
- #B4381001M 1/8" Collet Drill Assembly with wrench
 (For Raster™ Braille)
- #B50300M Raster™ Braille carbide drill bit   (Fits in Collet Drill Assembly)

Tapes
The tapes are used to assist in adhering Rasters™ to non press-fit materials, such as
metals, Corian™ or photopolymer

- #B904014 Low tack transfer tape
- #B904015 Pure adhesive tape

Order Form (pdf)